The progress capture device we see used the most is the Petzl Micro Traxion. It feeds incredibly smoothly, which is mostly why it is so loved. It features a cam lock-out function that turns it into a pulley. This can be dangerous if you forget to re-engage the cam before use. Always double check that your system will catch you on the ground before you start climbing and have redundancy with what grabs when you fall.

The Edelrid Spoc is another toothed pulley, just like the Micro Traxion. It also features a cam lockout function, but instead of a metal switch, it relies on a small piece of cord to hold the cam open. You can easily untie or cut this cord to disable the lockout function so you can't forget to shut it when you start. The cam on the Spoc sticks out from the housing during use, so be extra careful to cinch slack in between your devices rather than below both. This will keep your devices separate and functioning properly!

The LOV3 is a fall arrest and descender device which operates on normal vertical ropes, or tensioned ropes.

An evolution of the LOV2, it has a captive function: the device can be installed on the rope, or removed from it, while it is connected to the carabiner. That means there is no danger of dropping the device during rope installation or removal. 

The SULU GO is a versatile braking and progress capture device with manual-assisted slide locking, ideal for lead and top rope climbing.

Features:

• Certified for using TOP ROPE SOLO climbing techniques
• Assisted braking device with zero force
• Smooth descent control: The revolutionary sled system, rather than a cam, enables an exceptionally smooth regulation
• Optional additional safety system: with a small carabiner, you can lock the device’s opening

Many homemade solutions have knots but these don't have any. They are easily adjustable whether you are climbing low angle or steep rock. These are extremely popular.

Grigri's are the iPhone of brake assisted devices. All around useful tool to have if you need to go hands free while on rappel to add your grabby devices back on or to hold you while you take off the grabby devices. Almost certainly you can use this gear anywhere else you can climb.

These are technically body positioning devices and not PPE personal lanyards because they are very static and if you allow any slack in them and fall, you could break something in the system. However, they are the easiest daisy to undo as you can literally be sitting on them, hold the tail and push the button. All other types require that you lift your body weight up.

These are the most common PAS out there and because of that they are out of stock all the time. The rope inside is dynamic and in theory, you could fall on it. It's never a good idea to fall on a PAS but this is safer than a purely static option. You have to lift your weight off it to pivot the head to extend it. Not a problem if you have something to stand up on. Difficult if you are freely hanging there.

Asymmetrical, self-belaying Y-lanyard made from energy-absorbing dynamic rope (SWIFT 48 PRO DRY 8.9 MM). Can be quickly and easily adjusted using a rope clamp—even if under load! The large loop enables simple attachment to the harness using a girth hitch.

Grivel's ascender is $20 cheaper than a Petzl one and it's handle can be used as a tubular rappel device or a spot to clip. It's got a giant thumb tab to open the teeth and works great. I've used it for years and think overall it is super good enough.

This anti-crossloading piece prevents your progress capture device from shifting on the carabiner, insuring peace of mind and letting you focus on the moves.

This essential add-on is designed to significantly increase the safety of your primary lead rope solo device carabiner, or to stabilize your top rope solo devices. 

Optimized for Stability:

• The Flex-Link features elongated clip-in holes which effectively prevent rotation. This keeps the band flush inside the carabiner body, ensuring stable and secure positioning during your climb.

Robust and Reliable:

• Specifically designed to enhance the security of aluminum carabiners, the Flex-Link ensures that your primary device connector remains robust and reliable under various climbing conditions.

Innovative Pass-Through Slot:

• The unique pass-through slot allows the Flex-Link to effortlessly fold into a racking mode. This lets the Flex-Link be hung loosely and out of the way on a carabiner. 

We offer SafetyPro in several diameters:

9mm: Balanced construction and supple in hand, this is the lightest of the SafetyPro offerings we carry.

Certified for EN 1891: Type B.

Elongation at 300 lbs: 4.5%

9 mm: 3.4 (lb / 100')

 10 mm: Carefully engineered kernmantle construction makes for a static work line with a small amount of stretch. Favored for rope access and rescue professionals.

Certified EN 1891: Type A

Elongation at 300 lbs: 4.5%

10 mm: 4.2 (lb / 100')

11 mm:

A technical work and rescue line, the heavy duty SafetyPro 11 mm offers a smooth but firm sheath that allows the rope to run easily through gear. It’s manufactured to meet the requirements of the most demanding rope access professionals.

Elongation at 300 lbs: 5.8%

11 mm: 5.1 (lb / 100')

Very low-stretch, very durable.

9 mm: High strength and low elongation in lightweight package. A versatile static rope great for TRS purposes. Also great for use in lightweight hauling and anchors.

Elongation at 10% of MBS: 2%

3/8" (9.5mm):
3/8" polyester static rope originally intended for arbor climbing, rope access, and lifting. 

Elongation at 10% of MBS: 3%

7/16" (11mm):

Maximum strength with low stretch. A multi-use rescue and rappel rope. Low-stretch properties and high-moisture resistance allow the 7/16" to operate consistently in wet and dry conditions.

7/16": 3.4%

NFPA 2500 (1983)